Red Westie wrote: Cheers Ian, I will give it a go.........my California started out with the ugraded /standard padded wheel and now has a Momo fitted.
We have the 'standard' non-PAS Caravelle wheel.
Ian.
golf gti steering wheel?
Moderators: User administrators, Moderators
-
Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: golf gti steering wheel?
We have the 'standard' non-PAS Caravelle wheel.
Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: golf gti steering wheel?
Hi Red Westy
I fitted a Golf wheel and then a few months ago had to trim down the spacers you kindly sent me................I worked out today the steering column bush had slipped so I repositioned this to the Bently dimensions 51mm/+5mm from bush to end of column. Do you know why this happens and what I can do to stop it happening again? I unfortunately had to replace the spacers with a less professional job but am back to the UK in August so will get some from a computer shop.
The other thing I noticed was the gap between the column joint plates is about 10mm and should be 3,5mm according to the manual, do you know which order you set all this up in?
Cheers for any help, I put a similar post on Brick-yard earlier but have not yet got a response.
Zeb
I fitted a Golf wheel and then a few months ago had to trim down the spacers you kindly sent me................I worked out today the steering column bush had slipped so I repositioned this to the Bently dimensions 51mm/+5mm from bush to end of column. Do you know why this happens and what I can do to stop it happening again? I unfortunately had to replace the spacers with a less professional job but am back to the UK in August so will get some from a computer shop.
The other thing I noticed was the gap between the column joint plates is about 10mm and should be 3,5mm according to the manual, do you know which order you set all this up in?
Cheers for any help, I put a similar post on Brick-yard earlier but have not yet got a response.
Zeb