red light & buzzer, engine cuts out

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

gregwiththegrin
Registered user
Posts: 10
Joined: 11 Jul 2012, 10:08
80-90 Mem No: 0

Re: red light & buzzer, engine cuts out

Post by gregwiththegrin »

Cheers ghost will go through the checks you suggested with a mechanic tomorrow. This certainly gives us a direction and a place to start :) Thanks again for your help. I am really grateful to you for taking the time. Good man :ok

Plugs have all been changed as has the Amplifier (Not much on the old girl that hasnt been changed to be honest!)

The fuel test sounds like a good idea as it certainly feels like a fueling issue... just weird how the 'buzzer of doom' is still buzzing after changing the engine and the clock... My limited understanding cant work out how a fueling problem (if it is this) and the buzzer are connected?

Still as I say certainly got something to work towards tomorrow so once again thankyou for that.

Have a great week mate.

greg

User avatar
ghost123uk
Registered user
Posts: 6855
Joined: 10 Mar 2006, 10:15
80-90 Mem No: 2585
Location: John in Malpas, in the very S. W. part of Cheshire.
Contact:

Re: red light & buzzer, engine cuts out

Post by ghost123uk »

gregwiththegrin wrote: My limited understanding cant work out how a fueling problem (if it is this) and the buzzer are connected?

I would say they are not connected, just coincidence ? (or does it always cut out when the buzzer kicks in ?)
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here

gregwiththegrin
Registered user
Posts: 10
Joined: 11 Jul 2012, 10:08
80-90 Mem No: 0

Re: red light & buzzer, engine cuts out

Post by gregwiththegrin »

Not buzzer and cut out no always connected... probably just coincidence as you suggest.

Thanks ghost!

User avatar
T25Convert
Registered user
Posts: 401
Joined: 20 Jun 2009, 09:27
80-90 Mem No: 7819
Location: Chester

Re: red light & buzzer, engine cuts out

Post by T25Convert »

Hi,

Out of interest what was swapped from the scrap van to your van? Was the whole engine and all ancillaries swapped, or do you have the 'new' block with all your parts on?

If it's your old fuel pump then this could be a good place to start looking for a fueling issue. Tired fuel pump (or short push rod, should be 100mm) only supplies a trickle of fuel at idle so it cuts out after a while as the fuel in the float cahmber gets used up. Under load the pump cannot supply enough fuel either, so van starts to cut out. With no load and medium revs the pump can once again keep up with demand and the van runs, until you do something silly like drive it or let it idle!

If you have a new pump, or it came with the other engine this is probably less likley, unless you are really unlucky! Note if you have a new push rod from GSF it will probably be 2mm too short, which only makes things worse.

Good luck getting it sorted!

Cheers,

Alex
RIP - George - 1.9DG '85 AutoSleeper Trident - rusted away

George Second - 1.9DG '89 Caravelle

Locked