Old martin he's only a little lad
rear hub nut removal
Moderators: User administrators, Moderators
Thinking back, seem to remember Martin handing it back with some sort of comment about it's usefulness - got the pulley nut off though.
Since broke it myself (getting some wheel nuts off of someone else's syncro), so seriously weakened, 'cos it wasn't my massive pulling power
Since broke it myself (getting some wheel nuts off of someone else's syncro), so seriously weakened, 'cos it wasn't my massive pulling power
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
-
Fritz
- Registered user
- Posts: 1628
- Joined: 17 Jul 2006, 22:51
- 80-90 Mem No: 380
- Location: Ormskirk, Lancashire
Make sure your nuts are tight,,,,,,,
Richie, don't forget to employ a pair of local fat ba$tards when it is time to refit the new hub nuts.
I was recently caught out on my return from Harrogate with what turned out to be a loose O/S/R hub nut, I was treated to some very strange droning noises on the over-run while driving along the A59.
Since the nut has had some treatment from Mr Sukhoi and his nut tightening equipment it has been fine.
Regards
Fritz,........
I was recently caught out on my return from Harrogate with what turned out to be a loose O/S/R hub nut, I was treated to some very strange droning noises on the over-run while driving along the A59.
Since the nut has had some treatment from Mr Sukhoi and his nut tightening equipment it has been fine.
Regards
Fritz,........
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
