Anyone stripped a 1.7D (KY)?

Post by **Simon Baxter** » 01 Oct 2006, 20:39

Heh, this doesn't happen very often does it!
Im asking a question.
Has anyone ever had a 1.7D in pieces?
Could you tell me if the bores have oil spray jets?
I never see the 1.7D's in the garage nevermind have them in pieces!

Post by **Tex Ritter** » 02 Oct 2006, 09:15

If you've got one in pieces at the moment, and the design is anything like the HGVs then the spray jets will be attached near to the bottom of the cylinder bore....very easy to damage by the way.

Or if you drop the sump, you should be able to see them, or not, as the case may be.

Tex Ritter

Post by **HarryMann** » 02 Oct 2006, 09:21

ETKA Implies not

Post by **Simon Baxter** » 02 Oct 2006, 17:36

Tex Ritter wrote:If you've got one in pieces at the moment, and the design is anything like the HGVs then the spray jets will be attached near to the bottom of the cylinder bore....very easy to damage by the way.

Or if you drop the sump, you should be able to see them, or not, as the case may be.

Tex Ritter

I think you misread the question old bean!

Post by **Simon Baxter** » 02 Oct 2006, 17:37

HarryMann wrote:ETKA Implies not

I only got a small monitor, ETKA chopped the important bit off for me!
So, are you positive they have no spray jets?

Post by **Tex Ritter** » 02 Oct 2006, 21:00

Simon Baxter wrote:
I think you misread the question old bean!

I sure did...DOHH!

Post by **Russel** » 03 Oct 2006, 06:19

The few i have stripped for parts havent.