DK gearbox filler plug - what size tool ?

Post by **ghost123uk** » 29 Sep 2006, 15:28

Does anyone know what tool is required to undo the filler plug on a DK gearbox ?

Post by **Fritz** » 29 Sep 2006, 15:31

17mm hexagon allen key/ socket, come to mind for some reason.

Regards

Fritz,,,,,,

Post by **T'Onion** » 29 Sep 2006, 15:35

and undo the filler before you undo the drain

Post by **Mocki** » 29 Sep 2006, 15:39

dk gearbox is Aircooled for a CU iirc...... but the tool is 17mm hex and like mark says, undo fill be for drain.......ot you have to turn the van on its side to refill!

Post by **ghost123uk** » 29 Sep 2006, 16:25

Aye Steve, Mark and all...

That s why I asked as I wanted to make sure I had the correct tool, and that the filler plug came out before draining the oil !!

E D I T = btw, my 1.9 DG has a DK box bolted on, I understand these are good boxes and I am told were used on some of the Porsche's.

Cheers folks

Post by **sixsprings** » 29 Sep 2006, 16:52

ghost123uk wrote: has a DK box bolted on, I understand these are good boxes and I am told were used on some of the Porsche's.

Cheers folks

as i understand, the strongest and with a high top ratio. but porshes? i don't know about that...

Post by **DiscoDave** » 29 Sep 2006, 17:45

chad wrote: i don't know

Post by **ghost123uk** » 02 Oct 2006, 09:01

DiscoDave wrote:
chad wrote: i don't know

Neither do I

Does anyone else not know ?

Club 80-90 Forums

DK gearbox filler plug - what size tool ?

DK gearbox filler plug - what size tool ?

filler plug size