Hi, I need to fit rear seat belts to be able to secure a child seat.
I have a high top camper that started life as a regular type 2.5 panel van. Where can i take the van to get seat belts fitted. I lkive in the west Midlands. I dont mind fitting myself if i can buy the proper kit.
Fitting rear seat belts to high top
Moderators: User administrators, Moderators
-
vwstanley66
- Registered user
- Posts: 10
- Joined: 09 Apr 2006, 21:18
- 80-90 Mem No: 0
- Location: West Midlands
-
jen
- Registered user
- Posts: 580
- Joined: 05 Feb 2006, 21:00
- 80-90 Mem No: 397
- Location: Greater Manchester
You can buy the proper kit from Just Kampers etc. As your van started out as a panel van, you will need to drill the holes and use backing plates.
The seat belts traditionally attach towards the top of the under seat/bed bulkhead, and for 3 point belts at the rear of the van behind the vent (you can fit your backing plate this way).
The seat belts traditionally attach towards the top of the under seat/bed bulkhead, and for 3 point belts at the rear of the van behind the vent (you can fit your backing plate this way).
If you are a playmobil person then your chances of drowning are significantly increased by wearing a life jacket.
Club 80-90 Member No.397 (& 2410).
Club 80-90 Member No.397 (& 2410).
-
vwstanley66
- Registered user
- Posts: 10
- Joined: 09 Apr 2006, 21:18
- 80-90 Mem No: 0
- Location: West Midlands
Thanks
Thanks Simon, I had looked at your link before but didnt think it would suit my van. It is now crystal clear, thanks.