Aircooled Gearbox linkage question

Post by **skyever** » 23 Aug 2006, 17:08

Hi all, Have just bought an Aircooled 2 litre gearbox to put on my 86 diesel but am unsure of what linkage I need. Do I need the 2000cc linkage or will my existing do, if not where can I find the parts? (the box has a hydraulic clutch)
thanks

Post by **camper** » 24 Aug 2006, 16:10

I have taken the gearbox out of my 1990 1.6td to replace with a 2ltr aircool box and to change the bell housing and input shaft.There is a problem which i did not realise.Rear mountings are diffrent and gearbox linkage ball into gearbox is further back.My linkage rod needs to be shorter any advice please.

Post by **camper** » 24 Aug 2006, 17:39

I looked at the answers to this question on the forums.And yes we need the Aircooled 2ltr van gear linkage .I am making inquires as to obtain i would suggest try the links on 80 90 ie spares from well known sources.

Post by **skyever** » 24 Aug 2006, 19:40

Thanks camper, best of luck finding one, I suppose the 1600 one will fit too. I looked for info but could not find much.

Post by **geordie skydiver** » 24 Aug 2006, 19:43

I have a 2.0L gearbox and linkage if you want them, PM me with a offer for both or just the linkage.