Marker pen & varnish

Post by **fried chicken** » 21 Aug 2006, 19:25

Hi, does anyone know how to remove marker pen writing which has been clear varnished over on a high top, without damaging the fiberglass??

Thanks

Post by **OLD ONE** » 21 Aug 2006, 19:35

Is the Fiber Glass top painted or just gel coat finish. If it is the latter, you can proberly get away with T Cut

Post by **kevtherev** » 21 Aug 2006, 19:40

Is it varnish or laquer?
T-cut will strip back layers as will celulose (carefull!)

try a small spot with a cotton bud or something and see what works best.

Post by **fried chicken** » 21 Aug 2006, 19:46

The top is not painted (white from Factory?) so is this a gel coat finish?
I dont want to upset the structure of the roof, but I can live with it as it is.

Post by **OLD ONE** » 21 Aug 2006, 19:46

Kev... I trust you mean celulose thinners...Yes

Post by **OLD ONE** » 21 Aug 2006, 19:52

T Cut will not give problems . Gentle use of thinners is OK. but do not splash it on painted surface.

Post by **kevtherev** » 21 Aug 2006, 21:48

I did old one.....(sounds like some movie dialogue!)

Post by **ROBS T25** » 22 Aug 2006, 05:36

put some thinners on a clean cloth wipe of then t-cut and polish area should take no more than 10 mins job done

Club 80-90 Forums