Anyone got a dg 1900 w/shop manual nearby

General Technical Questions and Answers last answered over 1 year ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics

Moderators: User administrators, Moderators

Locked
OB1
Registered user
Posts: 30
Joined: 26 May 2006, 11:37
80-90 Mem No: 1606
Location: WARWICK

Anyone got a dg 1900 w/shop manual nearby

Post by OB1 »

Been a bit of a numpty and dont know firing order and which cylinder No is which on a 1983 1900dg water cooled engine (Lost workshop manual )
Any replys gratefully received
OB1
Now if I just turn it a little bit more !!

User avatar
Grun
Registered user
Posts: 164
Joined: 11 Oct 2005, 07:57
80-90 Mem No: 1250
Location: Exmoor

Re: Anyone got a dg 1900 w/shop manual nearby

Post by Grun »

OB1,
Firing order 1-4-3-2 (I always remember it as 4-3-2-1 and then start with 1, if that makes sense :roll: )
Number one cylinder is front right, 2 rear right
3 front left and four rear left. Front being front of van or clutch end.

Mike
'Two 'eads is better'n wun even if mine's a sheeps'
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop

OB1
Registered user
Posts: 30
Joined: 26 May 2006, 11:37
80-90 Mem No: 1606
Location: WARWICK

Re: Anyone got a dg 1900 w/shop manual nearby

Post by OB1 »

Grun wrote:OB1,
Firing order 1-4-3-2 (I always remember it as 4-3-2-1 and then start with 1, if that makes sense :roll: )
Number one cylinder is front right, 2 rear right
3 front left and four rear left. Front being front of van or clutch end.

Mike
Many thanks - that should get me sorted and then must have good look for book
This type of info needs putting on the Wiki thing if only i wus that clever

OB1
Now if I just turn it a little bit more !!

User avatar
Grun
Registered user
Posts: 164
Joined: 11 Oct 2005, 07:57
80-90 Mem No: 1250
Location: Exmoor

Re: Anyone got a dg 1900 w/shop manual nearby

Post by Grun »

OB1,
A good place for info on line is Here
Click on 'information' on the home page. Simon Baxter has done a good job.
Mike
'Two 'eads is better'n wun even if mine's a sheeps'
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop

OB1
Registered user
Posts: 30
Joined: 26 May 2006, 11:37
80-90 Mem No: 1606
Location: WARWICK

Post by OB1 »

T3teedubya wrote:There is a little diagram of the plug lead layout in Haynes manual but strangely not in Bently's.
Thanks- Just out of interest how much room does your lpg take up?
OB1
Now if I just turn it a little bit more !!

Locked