Gearbox Help

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
dsa
Registered user
Posts: 445
Joined: 08 Feb 2007, 20:57
80-90 Mem No: 3186
Location: Scotland

Gearbox Help

Post by dsa »

Hi all looking for some advice out for a short run in the van today 1.6 td 5 speed all good on the way to destination but suddenly on the way home gear stick became hard to come out of second and forth and eventually lost 2nd and  4th so nursed back home using 1st 3rd and 5th only had about 20 miles to cover as I got back into village 3rd and 4th got almost impossible to find managed to find 3rd on last down hill section and into my driveway where it appears to be stuck in 3rd gear clutch is operating as normal. Over the years I have never really had any linkage or gear issues on any of my vans I am hoping a linkage issue any advice would be great.
Gordon
1989 Westfalia California 1.6 TD

User avatar
mioba
Registered user
Posts: 657
Joined: 10 Jul 2009, 11:48
80-90 Mem No: 7850
Location: Nottingham

Re: Gearbox Help

Post by mioba »

Will be the linkages. Time to get under and have a look.

BW do the kit.

A very satisfying job when done
Westfalia Hightop Top Joker 1.6TD - aka Daisy, my labour of love

silverbullet
Trader
Posts: 17901
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Gearbox Help

Post by silverbullet »

Clamp between the front and rear sections of the shift rod might have come loose or is incorrectly positioned/oriented preventing secure clamping.
And/or the selector (ball) is loose on its shaft due to loose nut or the plastic ball has split making it loose on the steel arm portion.
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156

Post Reply