Does anyone know of a serpentine belt conversion for the DG engine? I know T2 & Beetles have kits but I’ve never seen one for the 1.9. I have a 90 amp alternator which must put a load on the V belt & unless the belt is tensioned perfectly it does that little cherp after starting. I have made my own belt adjustment modification which makes it easy to adjust but the whole design is poor with only a small part of the crankshaft pulley touching the belt.
Any information would appreciated.
Serpentine belt conversion DG engine
Moderators: User administrators, Moderators
-
audiquattro
- Registered user
- Posts: 6
- Joined: 20 Apr 2021, 09:34
- 80-90 Mem No: 17356
- Location: Blairgowrie, Perthshire, Scotland.
Serpentine belt conversion DG engine
1988 DG Reimo HiTop.
-
muttleypup
- Registered user
- Posts: 253
- Joined: 29 Sep 2016, 19:49
- 80-90 Mem No: 0
Re: Serpentine belt conversion DG engine
Could be that with the belt slipping a little, over time the pulley surfaces have been polished. Try roughing them up with some sandpaper or emery cloth so the belt grips better. Had similar problem and this worked.
1987 single cab pickup 1.9 1Y