JX 1,6 TD Twin Belt Setup

[dcworm57]

Hi Clift_d
Please can you send me the manual aswell.
thanks v much 
Dave 

[muttleypup]

Water pump belt tension is adjusted by adding/removing shims from the middle of the pulley. To increase tension, undo the three bolts holding the pulley on, take off the outer, pop a shim out and re-assemble. Run the engine briefly to let the belt settle in the pulley and re-tighten the bolts.

[clift_d]

Would you mind sharing the manual with me also?

Hi Clift_d
Please can you send me the manual aswell.
thanks v much 
Dave 

You both have a PM...

[maccast25]

Could I also ask for a copy of the jx manual please


Sent from my iPhone using Tapatalk

[clift_d]

You have a PM...

[sand]

Hi there, looking for this manual too - got belts done, then the aux one snapped a week after. Got RAC out to fix, working fine, but a few days later started to sound a bit squeaky and I think its coming from the aux belt (I've got the one belt for alt + water pump). If the link to the manual could be posted here maybe that could help others down the line rather than bothering you with a PM, none the less I would appreciate taking a look at the manual. Cheers

[clift_d]

You have a PM.