1.6td jx. Bosch pump.
Ive just replaced the throttle shaft seal and eventually got it all back together and running. But it’s now smoking whereas it didn’t before. Any suggestions as to where to start looking?
Thanks.
Smoking after seal change
Moderators: User administrators, Moderators
-
glennyboy2
- Registered user
- Posts: 39
- Joined: 16 Oct 2005, 13:00
- 80-90 Mem No: 1838
- Location: newquay,cornwall
Re: Smoking after seal change
Timing perhaps?
1984 Caravelle 1.9 DG 34 DAT
2008 Audi TT 2.0 Tdi 170 Quattro
2008 Audi TT 2.0 Tdi 170 Quattro
-
colinthefox
- Registered user
- Posts: 885
- Joined: 20 Oct 2009, 18:42
- 80-90 Mem No: 16447
- Location: Somerset
- Contact:
Re: Smoking after seal change
If you didn't change anything else when renewing the seal, then it would be logical that something with what you did has changed a setting. Just about the only thing that could have changed is that the arm was refitted in a different position on the spindle. You could try refitting it rotating by one spline and see if that cures it.
1.9D (AEF) pop-top. Aaaaahhhhh........that's better.
-
davidoft1
- Trader
- Posts: 2875
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Smoking after seal change
Has anyone altered the fueling to allow for the difference caused by the leak