Inlet manifold leak
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 117
- Joined: 06 Mar 2011, 18:52
- 80-90 Mem No: 17097
- Location: Gwent
Inlet manifold leak
I have discovered a leak around the manifold to head gasket. I sprayed soapy water around it and it starts making bubbles. It seems to be blowing air not sucking in . I've also tried it with carb cleaner but made no difference in the revs of the engine. Is this an intake valve leak and how do I find and fix it. 2ltr cu petrol Aircooled with twin dell's.
-
- Registered user
- Posts: 225
- Joined: 06 Sep 2020, 06:40
- 80-90 Mem No: 0
Re: Inlet manifold leak
Was the engine cold? I suspect the water was boiling? If you had pressure there it wouldn't run and you would not have any servo brake assistance.
1982 Holdsworth poptop. 2L CU Aircooled.
1982 Danbury tintop Caravelle. 2L CU Aircooled.
1982 Danbury tintop Caravelle. 2L CU Aircooled.
-
- Registered user
- Posts: 117
- Joined: 06 Mar 2011, 18:52
- 80-90 Mem No: 17097
- Location: Gwent
Re: Inlet manifold leak
Thanks, I think the engine had been running so hot possibly.
-
- Trader
- Posts: 2875
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Inlet manifold leak
Having seen the facebook video I think that you have air bubbles from the heat expanding, if there’s no change of engine speed with carb cleaner there’s no leak , what fault are you attempting to diagnose?
-
- Registered user
- Posts: 117
- Joined: 06 Mar 2011, 18:52
- 80-90 Mem No: 17097
- Location: Gwent
Re: Inlet manifold leak
Popping, misfire noise, seems more on deceleration. Sounds more like underneath.
-
- Registered user
- Posts: 117
- Joined: 06 Mar 2011, 18:52
- 80-90 Mem No: 17097
- Location: Gwent
Re: Inlet manifold leak
Just a thought, if there was a leak around the gasket but the air was blowing out instead of sucking in would the engine sound different.
-
- Registered user
- Posts: 117
- Joined: 06 Mar 2011, 18:52
- 80-90 Mem No: 17097
- Location: Gwent
Re: Inlet manifold leak
Just repeated the test with cold engine and still the same amount of bubbles.