the only clearly visible mark on the pulley is a 5 degree BTDC mark.
Well.. if thats the case I'm at 5 degrees..IF there is no difference between Digijet and Digifant pulleys.... I think I'll do the 3k 35 and see how that goes!
Moderators: User administrators, Moderators
the only clearly visible mark on the pulley is a 5 degree BTDC mark.
silverbullet wrote: ↑10 Sep 2023, 16:48 I have a feeling that the SP was a carb 2.1 for a specific market.
Gavrilo wrote: ↑17 Sep 2023, 17:17 If any one is putting E10 in a vehicle with a carburetor they should be aware that E10 contains more oxygen molecules than E5 meaning the engine will run leaner (hotter) unless it has been adjusted to suit, I fitted a A/F ratio meter so I can adjust the carbs to run best on what ever I chose to fill it with, and generally keep an eye on the mixture