2.1 DJ Coolant System Layout Help Needed

[Latenights]

This sort of thing...
https://www.mansispeed.com/product-page/ms-700-efi-kit

Sent from my moto g(30) using Tapatalk

Thanks for the link but that is way too pricey for my tastes.

So if I'm keeping the digijet, single point is what you recommend then, yes?

[Latenights]

https://lpgautosupplies.co.uk/shop/lpg- ... -flow-mtr/

Sent from my moto g(30) using Tapatalk

I recently seen this setup to make room for the backfire valve and mixer.

Thanks both for the advice. That mixer seems really reasonably priced. I was advised to get a backfire valve too - does that go in the airflow side of things or the LPG lines?

Is it visible in any of the pictures.

[T3luestar]

That's the blow back fitted in the above picture, between the AFM and the air intake boot.

https://lpgautosupplies.co.uk/shop/lpg- ... ype-v0070/

[Latenights]

That's the blow back fitted in the above picture, between the AFM and the air intake boot.

https://lpgautosupplies.co.uk/shop/lpg- ... ype-v0070/

I had a bad feeling you'd say that!

Obviously it's possible to fit these in with the standard air filter box because there are photos, but I'm thinking maybe a new air filter might be the easier option, especially as my existing vaporiser is positioned where some of the ducting to the filter housing needs to go for the DJ.

Thanks for the advice and links.