Has any one used theses ? Brickwerks have been out of stock of the good ones fir w while now..
T3 technique ball joints
Moderators: User administrators, Moderators
T3 technique ball joints
ball joints
Has any one used theses ? Brickwerks have been out of stock of the good ones fir w while now..
Has any one used theses ? Brickwerks have been out of stock of the good ones fir w while now..
Re: T3 technique ball joints
Have a read up on James Akers blog under Sir Adventurer.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- lloydy
- Registered user
- Posts: 8016
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: T3 technique ball joints
I’ll be getting them at some stage during my rebuild
Time is a drug. Too much of it kills you
Re: T3 technique ball joints
I have read it and these have the machined caps hence why i was considering them.. And the uppers as well which are machined caps and fitted with grease nipples. Was hoping someone had dealt with or tried them as its $50 dollar postage
Bringing total up to £220 for a full set plus import etc
Over double a set from brickwerks who are still out of stock.
Bringing total up to £220 for a full set plus import etc
Over double a set from brickwerks who are still out of stock.
-
- Registered user
- Posts: 612
- Joined: 21 Feb 2010, 20:50
- 80-90 Mem No: 17450
- Location: Derbyshire
Re: T3 technique ball joints
I could be interested in a set, or just the uppers. Very disappointed with my Meyle "HD" ones that are already floppy after about 1300 miles, and it would be nice to get rid of the spacers too, particularly after I found out how much someone has ground out of one to make it fit...
- ZsZ
- Registered user
- Posts: 1418
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: T3 technique ball joints
Samba topic:
https://www.thesamba.com/vw/forum/viewt ... p?t=759321
I think the UK traders will get some when the production spins up. It is possible that they are already sailing through the pond
the other older topic:
https://www.thesamba.com/vw/forum/viewt ... p?t=276274
not sure about the current available ones, but if the cap is machined and not stamped, then it is OK.
the OEM Lemforders were good, but AFAIK they stopped making them
German TK (their Brickwerks ) sells Meyle Hd, Febi and Heyd brand ones
I think TRW ones have machined cap.
Old pic form US market ones:
https://www.thesamba.com/vw/forum/viewt ... p?t=759321
I think the UK traders will get some when the production spins up. It is possible that they are already sailing through the pond
the other older topic:
https://www.thesamba.com/vw/forum/viewt ... p?t=276274
not sure about the current available ones, but if the cap is machined and not stamped, then it is OK.
the OEM Lemforders were good, but AFAIK they stopped making them
German TK (their Brickwerks ) sells Meyle Hd, Febi and Heyd brand ones
I think TRW ones have machined cap.
Old pic form US market ones:
Last edited by ZsZ on 22 Aug 2022, 09:59, edited 1 time in total.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th