Hi I’m in the middle of fitting ply wood panel but can’t see any holes for the clips to go into on near side rear just 3 dimples which line up with the holes on the panel, is there some specific clip that glues in anyone got any photos of what should be there as a hole would probably letting water from the air van outside. Any help would be appreciated
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol:
T25boy71 wrote: ↑01 Apr 2022, 09:54
Hi I’m in the middle of fitting ply wood panel but can’t see any holes for the clips to go into on near side rear just 3 dimples which line up with the holes on the panel, is there some specific clip that glues in anyone got any photos of what should be there as a hole would probably letting water from the air van outside. Any help would be appreciated
As pictured above. Panel vans, kombis and early caravelles had those lips welded to push the panel under.
Late caravelles and multivans had those tabs with holes welded to push the plastic clips into.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
ZsZ wrote: ↑01 Apr 2022, 12:07
As pictured above. Panel vans, kombis and early caravelles had those lips welded to push the panel under.
Late caravelles and multivans had those tabs with holes welded to push the plastic clips into.
Ok thanks I’ll have to make them, any idea how far they stick out where the hole is.?
cheers
I also will need to remove the metal channel to the left and trim the ply panel.
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol:
Looks like you have the lips.
Have they been flattened?
You could just pry them up if that's the case.
Just put grommets or shortened clips in the plywood holes