ajsimmo wrote: ↑26 Jun 2021, 12:55
Now I didn't expect that. Good to hear the outcome, even if I was wrong.

Sent from my ONEPLUS A3003 using Tapatalk
Your advice is totally sound. The problem suggested loom issue all the way.
l swapped borrowed (now purchased from Rob

) ECU and straight away the fuel pump did the usual prime. I then unhooked loom connector and did OHMS tests on all injectors pins 7-11, 7-12, 7-23 & 7-24 and each read around 15 ohms, so within manual spec. The only thing l cant recall after such a long day is whether l did test with ignition on or off? Or does it matter?
I then plugged loom connector back into suspect old ECU and the problem was there again. Constant running fuel pump on turn key.
Plugged back in new ECU and normal priming resumed.
At least l am moving forward. Slowly!
Regards
Stuart