Anti-roll bar popped out of bushing?

[Ciaraneng]

My anti-roll bar has looked like this on the near side for some time. I have an MOT (CVRT over here) coming up. Is it a problem and if so is it just a case of loosening off the adjacent bracket and giving it a whack?



Sent from my iPhone using Tapatalk

[Ciaraneng]

Sent from my iPhone using Tapatalk

[davidoft1]

Lever , whack it back in place , check if the bush is worn

[TONYT25T25]

Sent from my iPhone using Tapatalk

Is that a rub mark at the base of the anti roll link bar where it maybe making contact with something else
 

[Ciaraneng]

Thanks David. Managed it with a vice grips and a large shifters to rotate the connecting rod.


Sent from my iPhone using Tapatalk

[Ciaraneng]

Hard to tell if the Bush is worn but probably is since it drifted out of place.


Sent from my iPhone using Tapatalk

[Ciaraneng]

Other side


Sent from my iPhone using Tapatalk

[Ciaraneng]

Sent from my iPhone using Tapatalk

Is that a rub mark at the base of the anti roll link bar where it maybe making contact with something else

Yes, just rubbing against the speedo cable though so not moving anything
 

[TONYT25T25]

Know what you mean, the speedo cable does seem to be secured in different areas, mine is cable tied to the spare wheel carrier rods.

[Ciaraneng]

Know what you mean, the speedo cable does seem to be secured in different areas, mine is cable tied to the spare wheel carrier rods.

Might do that tomorrow