As above, exhaust mount missing - or ripped itself to bits.
Mine did that - and when I replaced it the force required to align it and get it bolted up was ridiculous - bolting the other side up causes that end to really kick out and mis-align.
I'm hoping when I get a new exhaust it will be a much improved fit - that's if its the exhaust to blame.
Absolute PITA of a thing to fit considering how simple it is!
1991 (LHD) Syncro kombi 1Z 1.9MTDi - 300TDi Landy Injector pump - General Grabber 215/70/16
Life is too short to drink s@@t beer.
Jim San wrote: ↑19 Aug 2020, 21:48
As above, exhaust mount missing - or ripped itself to bits.
Mine did that - and when I replaced it the force required to align it and get it bolted up was ridiculous - bolting the other side up causes that end to really kick out and mis-align.
I'm hoping when I get a new exhaust it will be a much improved fit - that's if its the exhaust to blame.
Absolute PITA of a thing to fit considering how simple it is!
That’s great info re fixing it cheers Jim San. Cheers for sharing