
I have my webasto petrol heater fuel line spliced into the fuel tank outlet hose before it reaches the van's electric fuel pump. The problem I am having is my fuel pump after about three or four months starts to get a bit 'sticky' in that it wont prime when you turn the ignition on. If I give it a tap then it will then prime when turning the ignition on again which tells me its starting to fail again. When the pump is running it never sounds smooth. There is always like an intermittent buzzing coming from it.
I am starting to wonder if the webasto fuel feed line is the reason for this as I am thinking that the van fuel pump is sucking the fuel out of it leaving behind a vacuum or air, causing pump cavitation.
Does thay sound feasible? Where do you peeps take your petrol heater feed from?
Cheers