Engine mount removal

[MagicWagon]

I need to replace the engine mounts on my 1983 2.0 Air cooled CU engine.
From this diagram, I know I need to undo the nuts/bolts marked 2 + 4 to release the mounting bar from the van, but to release it from the engine, do I
- Undo nuts marked 14, leaving the engine bracket on the engine, or
- Undo bolts marked 6 and 7, and remove the bracket from the engine with the mounting bar.
https://drive.google.com/file/d/1tcXO6e ... sq9kheSdyB

[davidoft1]

that looks like a water cooled bar, there are a few differences, ill see if I can find a picture

[bigherb]

You need to remove/pull back the fan housing to reach the mounting bolt in the carrier.

[MagicWagon]

Perfect. Thanks bigherb ! Hopefully get started on it this afternoon.