The T3200E thread

[silverbullet]

This inlet elbow is trying my patience!
I have had to make a jig to approximate where the AFM connection is located in space (worked out from syncro inlet parts fitted to a DJ and using the exhaust port flange as a good datum) so I can work from there.
I think that there are too many compromises in trying to rework the 2wd elbow what with its compound angles and complex bends: there's still no space to get the crankcase breather and idle air feed into the joiner pipe and the throttle cable is too cramped, so I'll just cut the flanges off and use 70mm cast alloy 90 degree bends and straight pipe to put the throttle body where it really needs to be.
It'll be a better job in the end.

Sent from my S60 using Tapatalk

[silverbullet]

Hmmm.
https://www.justkampers.com/marketplace ... w/id/8347/" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

[clift_d]

Hmmm.
https://www.justkampers.com/marketplace ... w/id/8347/" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

£££££

[ash1293]

....plus shipping


Sent from my iPhone using Tapatalk

[clift_d]

... and import duty ...

[937carrera]

..... aw, go on then, and VAT.......

[ash1293]

Hmmm think I may have to save a little longer if I’m wanting a bit more petrol poke.


Sent from my iPhone using Tapatalk

[silverbullet]

...and its running an unsupported aftermarket ecu with mapped ignition.
Good luck with that!

Sent from my S60 using Tapatalk

[silverbullet]

Looks like I need to make a linkage to keep the DJ throttle cable in the stock location (standard service parts, no further issues) and then step up & across to connect to the VDE throttle body, in a properly engineered fashion.
This should do it.

IMG_20191123_224210.jpg

Sent from my S60 using Tapatalk

[silverbullet]

Note to myself: I'm going to give these people a go for wbx injector cleaning

http://www.injectortune.co.uk/Injector_Cleaning.html" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

[R0B]

They did mine a couple of years ago. Quick turnaround no complaints.

[Aidan]

I've used this guy many times, last time back in November for a customer's vehicle, quick turnaround, value for money
https://www.injectorcleaning.co.uk/faq.htm

[R0B]

Oh hang on, I used the same one as Aidan. It was he who told me about that company.

[ajsimmo]

Another vote for the Hull place. Nice to have Devizes as a backup option, so ta for t'link.

Sent from my ONEPLUS A3003 using Tapatalk

[silverbullet]

I'll try the Devizes outfit and report back, 12.50 per injector is very keep pricing.

Sent from my S60 using Tapatalk