hi ,yes remiss of me, i will try identify the gauge i use as an ideal and then what will suffice.
mm
What gauge of steel for repairs?
Moderators: User administrators, Moderators
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: What gauge of steel for repairs?
Body tinware 1-1.2mm not much difference to work with but the 1.2 is better to weld and work with gives good support when butt welding /letting in.
1.5mm for steps,lip and edge repairs,inner arch repairs (around seat belt anchorages)inside of B posts down to JP.
2mm reinforcement for belt anchorages,out rigger repairs, to vertical support above rear arm mount (need lower rear wing/arch off to get to this ,so you should know what your doing lol.
2,5-3mm replacing top of deformation panel (which lower front panel mounts to )and main chassi srepairs
the above is a brief guide only ask for specific areas if you need more
ta mm
1.5mm for steps,lip and edge repairs,inner arch repairs (around seat belt anchorages)inside of B posts down to JP.
2mm reinforcement for belt anchorages,out rigger repairs, to vertical support above rear arm mount (need lower rear wing/arch off to get to this ,so you should know what your doing lol.
2,5-3mm replacing top of deformation panel (which lower front panel mounts to )and main chassi srepairs
the above is a brief guide only ask for specific areas if you need more
ta mm
- clift_d
- Registered user
- Posts: 3295
- Joined: 04 Oct 2012, 23:51
- 80-90 Mem No: 11695
- Location: Hackney innit
What gauge of steel for repairs?
Fantastic! Thanks for taking the time to put that down - that info’s bookmarked and saved.
If any Admins are passing could we get this info in the wiki - I’ve popped a request in the appropriate thread already?
If any Admins are passing could we get this info in the wiki - I’ve popped a request in the appropriate thread already?
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro