Rustoration
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 293
- Joined: 04 Sep 2012, 21:25
- 80-90 Mem No: 11532
- Location: Wiltshire
Re: Rustoration
Looking great!
Don’t forget to fully treat and paint the inner sill before you put the closure panels in. I figured seam sealer was a good bet in there too. It’s incredibly difficult to get in there with a brush or spray gun.
Don’t forget to fully treat and paint the inner sill before you put the closure panels in. I figured seam sealer was a good bet in there too. It’s incredibly difficult to get in there with a brush or spray gun.
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773
http://forum.club8090.co.uk/viewtopic.php?t=165773
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Just bought a Waxoyl sprayer, hand pump, refillable, complete with extensions. Good for rear cross member too, and loads of other bits I imagine.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 293
- Joined: 04 Sep 2012, 21:25
- 80-90 Mem No: 11532
- Location: Wiltshire
Re: Rustoration
I meant etch prime, seal and colour coat rather than just an after paint treatment. As it says all over BW on their panels, don’t rely on the factory black on new panels.
The waxoyl is a defo though once she’s finished, don’t be tempted to use it as you go along though, the wax will react with any paint you use after.
The waxoyl is a defo though once she’s finished, don’t be tempted to use it as you go along though, the wax will react with any paint you use after.
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773
http://forum.club8090.co.uk/viewtopic.php?t=165773
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Man! Etch prime/weld through prime/acrylic prime? TOO MUCH CHOICE!
So I should use etch prime on those black panels, and bare metal too? I had a acrylic primer lying around which I’ve been using, but it’s mostly used up.
So I should use etch prime on those black panels, and bare metal too? I had a acrylic primer lying around which I’ve been using, but it’s mostly used up.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 293
- Joined: 04 Sep 2012, 21:25
- 80-90 Mem No: 11532
- Location: Wiltshire
Re: Rustoration
RogerT wrote:Man! Etch prime/weld through prime/acrylic prime? TOO MUCH CHOICE!
So I should use etch prime on those black panels, and bare metal too? I had a acrylic primer lying around which I’ve been using, but it’s mostly used up.
The weld through primer isn’t great to paint over, but it will protect in the joints between welded panels better than nothing. I would sand most of it off with 4 or 500 grit before priming properly, no need to be meticulous just most of it off.
Correct - etch primer for bare metal, it’s going to key everything else to the metal. It’s thin enough that a quick skiff over the edges will feather it out and not leave an edge.
Acrylic primer or whatever you use over the whole lot to actually protect the body work. That’s another reason you’ll see Hi Solids or HS primer used, it goes on nice and thick and prevents dings breaking completely through to paint as well as hiding slight imperfections. Most primers are porous, the exception being epoxy primers like the Commercial Vehicle range from Glasurit which are fully waterproof like a colour coat. The difference? Epoxy is much harder, protects a lot better but is very expensive, my 5l of CV Epoxy primer and activator was nearly £300 for 5L, yes that’s right three hundred. Much better than the original stuff VW used and way overkill for a regular paint job on an average motor, but I want it to really last. In theory it will last longer than the original paint.
The colour coat is essentially there for a sealed layer and to look pretty.
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773
http://forum.club8090.co.uk/viewtopic.php?t=165773
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Thanks, that’s very helpful.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- Funkyoid
- Registered user
- Posts: 60
- Joined: 14 Sep 2009, 21:08
- 80-90 Mem No: 7392
- Location: Dumfries, Scotland
Re: Rustoration
Has anything else happened?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
‘81 2.0ltr air cooled automatic Devon Camper - Gladys
‘81 2.0ltr air cooled manual Doka - Basma
‘81 2.0ltr air cooled manual Doka - Basma
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Loads! Mostly the usual chaos of family life that is driven by the usual guilt and dreams. For instance, this month I have been mostly selling my house. Next month I shall probably be mostly buying another, and then the month after that I shall be mostly moving house. As the motivation is downsizing, the potential new house may have a smaller garage. Imagine my joy...
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Rustoration
Oh dear, I feel for you. I assume you aren't going to get the van finished before the potential move, so what does that mean ?
Could you get somewhere smaller with a larger garage
Could you get somewhere smaller with a larger garage
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
I’ll get it fit for a vehicle transporter, and there’s also possibilities of renting and sharing garage space. My better half put a speculative wanted ad on gumtree and a couple of people got in touch saying they were after the same.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Seen a couple of places with big single garages, but the market here is a sellers market, just no chance of getting an offer accepted without having sold first. Might have to rent for a while too, if we don’t find a place to buy. But only one child at home now so not too disruptive.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
And I know that overall I am actually in a very lucky position compared to the majority of people in this country.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- bigbadbob76
- Registered user
- Posts: 1733
- Joined: 07 Nov 2016, 14:41
- 80-90 Mem No: 15707
- Location: Isle of Skye
Re: Rustoration
Hi mate.
Good luck with the move. are you staying in the same area?
I've been tempted to downsize too, I need a smaller house and a bigger garage.
Good luck with the move. are you staying in the same area?
I've been tempted to downsize too, I need a smaller house and a bigger garage.
'86 1.9 DG, 4 spd, tintop, camper conversion.
Split case club member.
Split case club member.
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Aye, same area (a few years school left for our youngest, and it’s a great school for her), but most likely smaller house and smaller garage, or rent/borrow a garage elsewhere . But, I should have more time available?
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Rustoration
Back at it over the last week, the impediment that’s got in the way over the last year is no longer in the picture.
So... Fill this gap...
Fabricated this wee shape (have patience, I’ll show more next time)
Fix the cover plate to the triangular reinforcement...
Fix both in position
Leaving the welds fixing the bottom edge of the triangular reinforcement till last.
I’m assuming that will pull in. Doing it in this order means the C pillar isn’t pulled in too far, and so the cover plate fits in its original position, locating the C pillar correctly. Otherwise the cover plate would ride up on the floor ribs.
And the wee fabricated piece should fill the hole at the end.
Sent from my iPhone using Tapatalk
So... Fill this gap...
Fabricated this wee shape (have patience, I’ll show more next time)
Fix the cover plate to the triangular reinforcement...
Fix both in position
Leaving the welds fixing the bottom edge of the triangular reinforcement till last.
I’m assuming that will pull in. Doing it in this order means the C pillar isn’t pulled in too far, and so the cover plate fits in its original position, locating the C pillar correctly. Otherwise the cover plate would ride up on the floor ribs.
And the wee fabricated piece should fill the hole at the end.
Sent from my iPhone using Tapatalk
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.