It's finally done - new Powerflex bushings on my trailing arms! I finished the job in August but it's taken me this long to put all the footage together (there was quite a lot).
All the various threads, posts and shared knowledge on here gave me the confidence to tackle this job - so thank you.
I'm going to need your help again as the mount points on both side need replacing. I've never welded anything before (but can borrow a gas MIG) so could use some advice on whether this is something a novice could tackle?
Complex though. Look at mshaw’s restoration thread, and mine as well. It could well be a can of worms, as if you’ve mounts to do you’ve probably got more to do.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
Sir Brixalot - I do cover the rear brakes in this but not a full rebuild. I'll be doing it in the new year so will make a video of it then.
crazyhorse - I did it over two weekends. The filming makes it a bit longer and I had to buy a new wheel cylinder in between. I think I could of done it over one weekend if I had everything in place.
