I got a reconditioned engine and I'm in the process of moving stuff cross to the new engine but have stopped for the following reason; I think I'm missing an ORing that sits within the housing for the crankshaft pulley.
So the bluw arrow points to the old engine and a rubber oring and the gree narrow points to the recon with no oring. The kit didn't come with an oring in the bag.
Does anyone know where I can buy a new oring from as I'm having trouble finding one...
The triple pulley set up has an o ring 36mmx4mm so either you have a triple pulley, ie power steering and or air con fitted or at some point your old engine came from a bus that had it
N 900 784 01 is the VW part number but any seal company or on ebay you should be able to find one if you need it
Aidan wrote:The triple pulley set up has an o ring 36mmx4mm so either you have a triple pulley, ie power steering and or air con fitted or at some point your old engine came from a bus that had it
N 900 784 01 is the VW part number but any seal company or on ebay you should be able to find one if you need it
Behind the O ring is an oil thrower disc, don't forget to remove this from your old engine, you may need to remove the new front oil seal to fit this.
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit
weimarbus wrote:Behind the O ring is an oil thrower disc, don't forget to remove this from your old engine, you may need to remove the new front oil seal to fit this.
thanks, I’ve you got a picture of what the throwerdisc looks
Like? It might already be in the recon..
Own; T25(3) RHD Carravelle conversion into camper. 2.1 petrol Wasserboxer.