Hi All
just sent the van of to get some welding on the wheel arches don and have finally started updating the interior, to do this I had to remove the old (original) flooring. I was advised by Doug (Dougs vw-werks) that it would be a good idea to replace this as it's a bit of a moister trap.
Having removed it and stood it up in the garage, it became apparent just how much.
This felt dry when I removed it but I now have a very wet garage floor as the water has drained out.
not wanting to tech my grandmother to suck eggs but I think if enyone still has the original flooring it might be a good idea to consider replacing it
Regards Gary
Last edited by bat on 03 Jan 2018, 16:41, edited 3 times in total.
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
Thanks for the heads up
Sorry Will look into it later.
Regards Gary
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
I think it had lost the S of the HTTP again, added now but can't tell from here if it has worked.
Regards Gary
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
S is now removed the HTTP perhaps that will work.
Sorry to be a problem for anyone really wont to get this to work.
Regards Gary
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
You must be more careful with your S's - you keep losing them. I wonder if it is because 80/90 isn't s http but then I would have thought someone else would have had it happen also.
very difficult to check on my computer because it accepts both. I think you are right my blog is https, 80-90 isn't, so when copying links I need to remove the S
Quik test
wheel arches in the proses of being extended (by Dan @ Doug's vw werks)
Regards Gary
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
I think the reason the floor was so wet has been found.
strange that I haven't notest any drop in coolant level
I was hoping to move the heater to one the side anyway, now I'm going to be removed completely and replace it with a diesel heater, in a more convenient position.
A few more hole in the floor for Dan to weld, (I will get the Beast to float )
Regards Gary
Sheila's & Gary’s long-term project. A 1988 RHD diesel Syncro camper van.
1900 tdi ahu, on 235-70-R16 wheels & tires, & a few other mods https://www.thebeast.blog
I wonder if it is because 80/90 isn't s http but then I would have thought someone else would have had it happen also.
)