Hi ive done about a thousand miles on new AAZ engine.
It's leaking a little oil from the rocker cover/top breather area. We fitted a new seal during engine change anyone know why this could be happening and how I might remedy it. My mechanic has suggested welding a short vertical pipe onto rocker cover to elevate breather an inch or two he thinks that might remedy problem. But I'm confused should we have that much oil sloshing up there anyway?
Any help much appreciated
JX/ AAZ Rocker cover / oil breather leak
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 362
- Joined: 21 Dec 2014, 18:34
- 80-90 Mem No: 0
- muttleypup
- Registered user
- Posts: 227
- Joined: 29 Sep 2016, 19:49
- 80-90 Mem No: 0
Re: JX/ AAZ Rocker cover / oil breather leak
Has it been overfilled? Oil capacity figure will be online somewhere to check, I'd guess at 4.5 litres. Don't rely on the dipstick, mine was wrong (on a 1Y) when i bought it and caused similar issue as i overfilled until I realised, simple enough to fill with correct amount then adjust/modify the dipstick to suit
1987 single cab pickup 1.9 1Y
-
- Registered user
- Posts: 362
- Joined: 21 Dec 2014, 18:34
- 80-90 Mem No: 0
Re: JX/ AAZ Rocker cover / oil breather leak
Thanks that's a good point i have re marked my dipstick twice since the engine change as I think it was slightly high before.