DG new fuel pipes & LPG fuel cut off valve relocation

[itchyfeet]

I realised recently that I have never changed all fuel rubber pipes, a lot have been changed over the years and all were in good condition but for peace of mind.

https://www.brickwerks.co.uk/fuel-hose- ... m-eco.html" onclick="window.open(this.href);return false;

Pics to share as usual

fuel filter and pipe from tank

P1080827 by Paul_Barr, on Flickr

While I was doing it I took the opportunity to relocate the fuel cut off valve, a lot seem to be fitted after the mechanical pump meaning if you had a split hose when running on LPG the fuel would just keep pumping.

No I can't be bothered with an electric fuel pump before you suggest it, I run on LPG mostly.

Now installed in pipe before pump on bracket

P1080823 by Paul_Barr, on Flickr

clip and polyamide pipe ( rigid plastic pipe) should be behind bulkhead

P1080829 by Paul_Barr, on Flickr

pipe to carb from pump and return from carb to tank , note one way valve that sits behind bulkhead pulled through for renewal.

P1080824 by Paul_Barr, on Flickr

and how it should be left behind bulkhead

P1080828 by Paul_Barr, on Flickr

return to tank

P1080826 by Paul_Barr, on Flickr

[300CE]

Nice write up here Paul, so important that these are changed. The fuel pipe provided by Brickwerks is the best I have come across and does not seem to have the problematic internal cracking of other hoses on the market.

I still check them regularly though.