![Very Happy :D](./images/smilies/icon_biggrin.gif)
I’m putting together all the bits I’ll need right now and have already had help from here, thanks all.
I’ll post up lots of pics along the way too. Here’s a few of preparations.....
My main dilemma is having to do it on the street outside my house in Hackney , for example cars are parked close so I my not have lots of room for an engine hoist, but if I don’t use one will the wood and ratchet method to lift the engine in from the floor be adequate or be less manageable? And if I go this way should I bolt the engine bars up to the engine and its mounts first then (once the input shaft is in) pull the whole lot up and do up the engine mounts to chassis?
I have ramps, tools, welder, (inner rear chassis in engine bay needs attention.) bellhousing, bars, mounts, stuff and more....to start soon or leave until warmer in spring[EYES]?
[//uploads.tapatalk-cdn.com/201711 ... 72ceb9.jpg[/IMG]
![Image](http://uploads.tapatalk-cdn.com/20171115/c858b3d32028b4db9de2d4f70d716775.jpg)
![Image](http://uploads.tapatalk-cdn.com/20171115/db260158efd3f1566b35a67fba3c5a91.jpg)
![Image](http://uploads.tapatalk-cdn.com/20171115/15c83e64a00d87c2b284abf7b2b9f7cb.jpg)
![Image](http://uploads.tapatalk-cdn.com/20171115/7972c0f948039b94a9a4ba6448dfc4cd.jpg)
Sent from my iPhone using Tapatalk