Whats the maximum tyre wheel combination that can be fitted with a standard suspension height. I currently have 16" 7j rims and am guessing van 80 profile tyres. I am trying to achieve a better ratio as have a big engine that revs high
Ideally you want to match the factory diameter tyres so your speedo is accurate. VW fitted 185/82 14", so with a 16" height, 7" width wheel you can have a 205/60 16" tyre which is within a mm of factory dia. and I'll recommend 32psi & 34psi f/r tyre pressures.
DoubleOSeven wrote:Ideally you want to match the factory diameter tyres so your speedo is accurate. VW fitted 185/82 14", so with a 16" height, 7" width wheel you can have a 205/60 16" tyre which is within a mm of factory dia. and I'll recommend 32psi & 34psi f/r tyre pressures.
Sent from my iPhone using Tapatalk
Forgot to mention this is just to the rear so will not affect the speed reported. I was thinking of 80 profiles. Would that extra 20 mm cause an issue do you think? The back sits a bit lower than the front so this would level things out a bit
marlinowner wrote:Of course you could always fit 60 profile tyres on the front to keep the speedo honest and 80 profile on the back to improve the gearing.
That's what ' have now all round and thought 80 at the back. Will I get clearance with 7j?