Time to "Subaruin" EJ20 or EJ25 in a Westy?
Moderators: User administrators, Moderators
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
Yep, not quite right at all. I had a great test drive through all 4 gears with the driveshafts disconnected. Not what I was hoping for this weekend though, I had planned to make it to the Olympic Park and back at least.
US Import Vanagon GL Westfalia (Subaru EJ25)
Re: Time to
what2do wrote:printmonkey wrote:Starting to lose patience with this swap now.
Yesterday evening I ran the van with the driveshafts off and went through the gears, the shift wasn't great and and I knew it would have to be adjusted.
This morning I connected the driveshafts but couldn't get the van into any gear with the engine running. I've disconnected the shift mechanism and found that the relay lever is loose and I can't select gears by hand, the gearbox is an ABD 4sp that I bought from Elvis which Aidan had rebuilt. Am I doing something stupid or is it time for a trip to Wales to let Aidan take a look?
https://www.dropbox.com/s/sixd3ozv4mdq1 ... 7.mp4?dl=0" onclick="window.open(this.href);return false;
Ooh, that's not quite right is it? What has Elvis said about it? If it weren't for the tranny issue, you'd be rolling by now wouldn't you? Fingers crossed it doesn't turn out to be a pig in a poke.
I've said nothing but there again this is the first I've heard/read about it.....
Don't know what to say other than it is a 0 mile gearbox after rebuild, never fitted or taken off pallet. PM has but report/invoice.
Gimme a shout if needs be chap
-
- Registered user
- Posts: 2827
- Joined: 05 Oct 2012, 08:55
- 80-90 Mem No: 11974
- Location: Salisbury
Re: Time to
ELVIS wrote:what2do wrote:printmonkey wrote:Starting to lose patience with this swap now.
Yesterday evening I ran the van with the driveshafts off and went through the gears, the shift wasn't great and and I knew it would have to be adjusted.
This morning I connected the driveshafts but couldn't get the van into any gear with the engine running. I've disconnected the shift mechanism and found that the relay lever is loose and I can't select gears by hand, the gearbox is an ABD 4sp that I bought from Elvis which Aidan had rebuilt. Am I doing something stupid or is it time for a trip to Wales to let Aidan take a look?
https://www.dropbox.com/s/sixd3ozv4mdq1 ... 7.mp4?dl=0" onclick="window.open(this.href);return false;
Ooh, that's not quite right is it? What has Elvis said about it? If it weren't for the tranny issue, you'd be rolling by now wouldn't you? Fingers crossed it doesn't turn out to be a pig in a poke.
I've said nothing but there again this is the first I've heard/read about it.....
Don't know what to say other than it is a 0 mile gearbox after rebuild, never fitted or taken off pallet. PM has but report/invoice.
Gimme a shout if needs be chap
Sorry Elvis, I didn't mean the message to come across as accusational, I'm aware that you know your stuff and wondered what your opinion was.
Why would the glass be anything other than half full?
'89 panel van, 1.9 DG.
'89 panel van, 1.9 DG.
-
- Registered user
- Posts: 2827
- Joined: 05 Oct 2012, 08:55
- 80-90 Mem No: 11974
- Location: Salisbury
Re: Time to
printmonkey wrote:Yep, not quite right at all. I had a great test drive through all 4 gears with the driveshafts disconnected. Not what I was hoping for this weekend though, I had planned to make it to the Olympic Park and back at least.
I know it sounds cumbersome but have you tried rotating one of the rear wheels whilst trying to engage one of the more difficult gears?
Why would the glass be anything other than half full?
'89 panel van, 1.9 DG.
'89 panel van, 1.9 DG.
Re: Time to
No dramas and no offence taken chap
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
ELVIS wrote:what2do wrote:printmonkey wrote:Starting to lose patience with this swap now.
Yesterday evening I ran the van with the driveshafts off and went through the gears, the shift wasn't great and and I knew it would have to be adjusted.
This morning I connected the driveshafts but couldn't get the van into any gear with the engine running. I've disconnected the shift mechanism and found that the relay lever is loose and I can't select gears by hand, the gearbox is an ABD 4sp that I bought from Elvis which Aidan had rebuilt. Am I doing something stupid or is it time for a trip to Wales to let Aidan take a look?
https://www.dropbox.com/s/sixd3ozv4mdq1 ... 7.mp4?dl=0" onclick="window.open(this.href);return false;
Ooh, that's not quite right is it? What has Elvis said about it? If it weren't for the tranny issue, you'd be rolling by now wouldn't you? Fingers crossed it doesn't turn out to be a pig in a poke.
I've said nothing but there again this is the first I've heard/read about it.....
Don't know what to say other than it is a 0 mile gearbox after rebuild, never fitted or taken off pallet. PM has but report/invoice.
Gimme a shout if needs be chap
I'm not doubting Elvis's honesty or Aidan's work. I'm sure I've cocked something up along the way. It use doesn't make sense why I could select gears before but not after I had connected the driveshafts.
US Import Vanagon GL Westfalia (Subaru EJ25)
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
what2do wrote:printmonkey wrote:Yep, not quite right at all. I had a great test drive through all 4 gears with the driveshafts disconnected. Not what I was hoping for this weekend though, I had planned to make it to the Olympic Park and back at least.
I know it sounds cumbersome but have you tried rotating one of the rear wheels whilst trying to engage one of the more difficult gears?
I'm going to get under the van tonight and take another look at the relay lever. After getting an email from Aidan this morning, I'm sure the thick washer is missing. I'll give rotating a wheel a go.
US Import Vanagon GL Westfalia (Subaru EJ25)
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
Disconnected one driveshaft tonight and rotated the drive flange (hate that word!) and can select all gears by hand. But the locking nut on the relay lever will not tighten up and I can't get it off either. I've put some plusgas on it and I'll have another go tomorrow night.
US Import Vanagon GL Westfalia (Subaru EJ25)
- Aidan
- Trader
- Posts: 6589
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Time to
Nut was a new nylock, sounds like you have stripped the threads on the nut and or shaft, if the selector arm is loose and the nut spins then you'd be best bringing it here
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
Thanks Aidan, I'll take another look tonight and let you know. The selector arm was loose before I connected the linkage and I only nipped it up with a socket. Looks like I need to put a 7hr road trip on the fridge calendar
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
US Import Vanagon GL Westfalia (Subaru EJ25)
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
Thanks to Aidan's 'while you wait' service on Friday morning the gearbox is back in and I can select all gears. I ran out of time this afternoon so will fill it with oil on Saturday and get a test drive in.
US Import Vanagon GL Westfalia (Subaru EJ25)
Re: Time to
What was the issue in the end chap?
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
ELVIS wrote:What was the issue in the end chap?
The thread on the selector was stripped so the relay lever was moving around. All good now which is all that matters. Looking forward to putting some miles on it asap.
Sent from my iPad using Tapatalk
US Import Vanagon GL Westfalia (Subaru EJ25)
-
- Registered user
- Posts: 2827
- Joined: 05 Oct 2012, 08:55
- 80-90 Mem No: 11974
- Location: Salisbury
Re: Time to
Phew, that was lucky. Hoping to fit my Nix thus weekend with itchy, let's hope there's no dramas.
Why would the glass be anything other than half full?
'89 panel van, 1.9 DG.
'89 panel van, 1.9 DG.
- printmonkey
- Registered user
- Posts: 403
- Joined: 03 Feb 2012, 21:50
- 80-90 Mem No: 11456
- Location: East London
Re: Time to "Subaruin" EJ20 or EJ25 in a Westy?
It's finished! (ish).
First test drive yesterday morning. I need to adjust the gear linkage, throttle cable and check the engine ground wire. But it felt good to get it out on the road at last.
I'll have to look at a shortened sump, lots of traffic calming measures due to the 'Mini-Holland' scheme in Waltham Forest and I'm sure I scraped it.
Sent from my iPad using Tapatalk
First test drive yesterday morning. I need to adjust the gear linkage, throttle cable and check the engine ground wire. But it felt good to get it out on the road at last.
I'll have to look at a shortened sump, lots of traffic calming measures due to the 'Mini-Holland' scheme in Waltham Forest and I'm sure I scraped it.
Sent from my iPad using Tapatalk
US Import Vanagon GL Westfalia (Subaru EJ25)