Border Restoration

Post by **doenut82** » 17 Mar 2016, 16:14

Does anyone know if Border Restoration in Shropshire is any good . Looking for a good body place in Shropshire.
Cheers .

Post by **kevtherev** » 17 Mar 2016, 18:12

Never used them but..
I know these guys are good
http://www.rscbodycentre.co.uk/" onclick="window.open(this.href);return false;

Fella there does vintage and classic restorations

Post by **Mr Bean** » 18 Mar 2016, 07:40

Shock horror!

For the moment I thought doenut82 had gone a bit non-PC there.

CS

Post by **aljo** » 29 Mar 2016, 15:54

doenut82 wrote:Does anyone know if Border Restoration in Shropshire is any good . Looking for a good body place in Shropshire.
Cheers .

Hi, just wondering if you found somewhere in Shropshire? My T25 is in dire need of some TLC on the bodywork and a bit of welding, I contacted Border Restoration but they said they just did T2 split/bays.

Post by **dbz864** » 29 Mar 2016, 20:03

Aljo what is it you require doing? Maybe put some photos up, so we can have a look, I see from the photo you have a autosleeper trident, which normally do suffer from rust/rot.

Post by **Plasticman** » 29 Mar 2016, 20:53

tell me one that doesn't

and yes good pickies do help advise
mm

Post by **doenut82** » 30 Mar 2016, 07:11

aljo wrote:
doenut82 wrote:Does anyone know if Border Restoration in Shropshire is any good . Looking for a good body place in Shropshire.
Cheers .
Hi, just wondering if you found somewhere in Shropshire? My T25 is in dire need of some TLC on the bodywork and a bit of welding, I contacted Border Restoration but they said they just did T2 split/bays.

Not yet but going to look at a place in telford , will keep you posted .

Post by **restoman** » 30 Mar 2016, 09:08

Marios MVE ?

Post by **doenut82** » 30 Mar 2016, 10:53

restoman wrote:Marios MVE ?

Think so, has he just moved prem ?

Post by **aljo** » 30 Mar 2016, 17:53

Here's some pics of Sonny, our van with some showing the worst of the rusty bits!

Suggestions of places in Shropshire/wed mids would be great - I have contacted MVE telford so far which may be an option, though they have quite a lead time at present.
Thanks!

Post by **restoman** » 30 Mar 2016, 19:48

Something wrong with venturing into wales? lol

Post by **aljo** » 30 Mar 2016, 20:15

restoman wrote:Something wrong with venturing into wales? lol

Not at all - I'm Welsh anyway! So yes, Wales is on the radar too - can't believe I missed it out!

Post by **dbz864** » 30 Mar 2016, 20:26

Typical autosleeper, cant really see the gutters much, if I was doing the job the bit that would concern me would be the gutters and rear trailing arm mounts and probably the arms as well, chances are it will be shot under the roof as well. Perhaps the words "don't go there" would spring to mind (referring to the roof) the rest is no big deal

Post by **aljo** » 30 Mar 2016, 20:33

Gutters - yeah, probably best not to go there! Alas, they're full of Sikaflex (and still leak!)

Post by **dbz864** » 30 Mar 2016, 21:20

don't want to worry you but depending how good you want it it might not be a viable project. As said the worrying bits are the trailing arm mounts(may be ok) and everything above and including the gutters. May be better to sell and buy another one. Unless you are in love with it then go for it. To do it right the roof would need to come off.You could get it almost as good as knew (at a cost)

Club 80-90 Forums

Border Restoration

Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration

Re: Border Restoration