![Embarassed :oops:](./images/smilies/icon_redface.gif)
however, two of them have 8mm holes on their ends and so obviously go to the big stud
one has a female spade and can only go to the male spade, marked 'w'
however, there are two others, both blue, both with 5mm holes on their ends. one is paired up with the wire to the 'w' connector and the other comes from the black sleeving along with a big red wire, one of the ones with an 8mm hole. i'm certain one of the blue wires bolted to the smaller stud connector and the other blue wire to a small bolt that holds the alternator together - this must be ground, right? but which blue is which?
also, it's 65amp