Well finished a few bits off,
first before
now with seals and grommets in
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6492_zps0wmf97vp.jpg)
door ready to rehang
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6494_zpsqrswbjoq.jpg)
after a few trials to readjust this
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6495_zpslcph5xz3.jpg)
and yep it dropped off ,well nearly as i sort of caught it.
there is just so much wear and slop in the linkage,and as im out of late ones i had to do a temp repair
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6496_zpsvemloprk.jpg)
shaft was well worn away soi built up with braze and a quick file top take most of the slop out, also packed it with a washer under so it functions a bit more like , the kick out spring is not happy but its sortable later
ive also ran another thin bead of steel along the top edge to help compensate for the wear in the runner wheel etc and this has enough room to accommodate a new assembly should it be acquired
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6497_zps0piucdei.jpg)
its abit tight to shut with the old seals bvut shut it does
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6498_zps3pw0mnxb.jpg)
and Steve should prefer this view
so onto tea
![Image](http://i1288.photobucket.com/albums/b496/metulman/both%20sills/IMAG6500_zpsypurvbhp.jpg)
tester coming in early for me in the morning so we get it done and away by lunch..ish
mm
![Very Happy :D](./images/smilies/icon_biggrin.gif)