rev counter

[daniel3933]

hi have early 1.9 wbx with original clocks , have fitted a original rev counter but no rpm signal ,it has green wire in dash plug ,is this wire not connected at coil, any help please

[itchyfeet]

You need to make a connetion from the coil negative (green) to the dash green.

In the later vans this is in the loom and goes via the fusebox.



A bit strange you gave the green at the dash, perhaos a change over van with mixed new and old looms, is it an 85?

[daniel3933]

yes its an 85 ,thank you ,will the oil light then work correctly aswell ,thanks for your time

[Mocki]

yes its an 85 ,thank you ,will the oil light then work correctly aswell ,thanks for your time

the rev counter will not alter the oil light
and unless your engine has the second oil pressure sender under the waterpump pulley the BoD wont work correctly
if you dont have the rev signal in the loom now, your van did not have BoD so if its the original engine, youwont have that sender

[daniel3933]

hi thanks for the replies ,it seems the green rpm signal wire at the dash does not go all the way to the coil, will graft new signal wire to green wire at dash ,

[Mocki]

does everything else work at the dash?
if you have early wiring, the 14pin plug at the dash will be wired diferently to the rev counter dash .....

[daniel3933]

hi just grafted in new wire from coil to green at dash plug ,all working corectly, just waiting for oil light pcb and then great looking dash pod ,many thanks for all of your help Danny