Trying to find a well priced rev counter (dash mounted) for my Subaru Ej25 conversion.
Want to run it from the ecu.
Anybody got any suggestions or know which ones work?
EJ25 Rev Counter Help!
Moderators: User administrators, Moderators
- Aidan
- Trader
- Posts: 6994
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: EJ25 Rev Counter Help!
golf2 etc 7k rev counter is compatible with engine and fairly straightforward swap into the T3 binacle, I haven't done it myself but Dai and others have
I have one in stock if you want it, I went with the SyncroSport dash upgrade as I had a poverty spec dash originally and Andy was doing the other wiring work on the van so went the whole hog, so even have check engine light in dash as well as accurate speedo and rev counter and digital clock
I have one in stock if you want it, I went with the SyncroSport dash upgrade as I had a poverty spec dash originally and Andy was doing the other wiring work on the van so went the whole hog, so even have check engine light in dash as well as accurate speedo and rev counter and digital clock
-
- Registered user
- Posts: 271
- Joined: 30 Jul 2008, 13:16
- 80-90 Mem No: 14722
- Location: Suffolk
Re: EJ25 Rev Counter Help!
Thanks Aiden
Have you any pix?
Have you any pix?
- lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: EJ25 Rev Counter Help!
this is it here
http://syncrosport.com/dash/" onclick="window.open(this.href);return false;
http://syncrosport.com/dash/" onclick="window.open(this.href);return false;
Time is a drug. Too much of it kills you
- Aidan
- Trader
- Posts: 6994
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: EJ25 Rev Counter Help!

as you can see not quite the same a the T3 rev counter but close, I think the outer holes align with our binnacle but the inner ones are in a different place and obviously there's only a fuel gauge and no temp gauge; drop Dai a pm he will be able to explain how he fitted it to his dash
and the rear looks like this, I think the 4 pin connector is the same as on our rev counter dash but if you haven't got a rev counter dash you won't have the plug on the foil so you'd have to sort a connector too and the connections for the fuel gauge may not be in the same place as yours

Neil axeman has also I think used one of these in his bus with scooby or his new inline 4 lump