gear box rumble

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
brandonabbie
Registered user
Posts: 64
Joined: 29 May 2011, 08:12
80-90 Mem No: 12054
Location: sleaford

gear box rumble

Post by brandonabbie »

hi i have 1.9 dg with a four speed box (abd) when driving any gear its rumbles...let of the gas quite....?
i had same noise on my mk2 golf output shaft baerings gone...would this be same problem?oh iv change oil.
thanks.

User avatar
Aidan
Trader
Posts: 7029
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: gear box rumble

Post by Aidan »

if the noise goes away when you lift off the power then it is the input side, so probably the mainshaft bearing on it's way out, or being majorly displaced by load, sludgy stem on the magnet confirms main bearing wear

brandonabbie
Registered user
Posts: 64
Joined: 29 May 2011, 08:12
80-90 Mem No: 12054
Location: sleaford

Re: gear box rumble

Post by brandonabbie »

Many thanks for that Aidan.....yer think your right...took it out today sump plug was as you said!
im sure you get asked this a lot....but what sort of job is it to do im a very skilled chap to a degree and no you are very busy at the moment.
thanks for advise

User avatar
Aidan
Trader
Posts: 7029
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: gear box rumble

Post by Aidan »

have a read of the Bentley manual it is all in there and as Haynes says it is only a 5 spanners job :ok
parts can be had from Brickwerks and me

brandonabbie
Registered user
Posts: 64
Joined: 29 May 2011, 08:12
80-90 Mem No: 12054
Location: sleaford

Re: gear box rumble

Post by brandonabbie »

many thanks Aidan........just spent most of the day tackling it all striped....main shaft bearing gone going to press out at work tomorrow...oh needed 6 spanners...... :D

Post Reply