TRACKING.

[mitchell1551]

Need tracking sorting on my T25 but i need someone in the teesside/north east area who can do this.can anyone recomend a garage

[mitchell1551]

or give me the correct info that i can pass on to garage as a few have knocked me back because of the age of the van

[AdrianC]

or give me the correct info that i can pass on to garage as a few have knocked me back because of the age of the van

Get hold of the Bentley manual, and it's all on p581 of the PDF.

There's settings for empty (800kg on front), half-load (1000kg) and fully-loaded (1100-1200kg).
Total toe is +20' +-30' (2.0mm +- 3.5mm) for empty and half, 0' +- 30' (0 +- 3.5mm) for full-load

Castor, camber and rear toe/camber settings are in there, too.

[voetsekman]

Need mine doind aswell, will give you a shout when I find somewhere, if it wasn't for the price of rubber I would just do it myself.
Would I be right in guessing you have the black and white tin top down by the old Brus arms, thinking I might of met up with you at kingfisher site in knaresborough.

[scottbott]

I found a place in Hartford called 'Perfect Touch',they use a machine called a Beissbarth laser alignment,they could do my van and it would take a couple of hours and cost £96,sounds a lot to me,is it a lot of money??

[HarryMann]

It is a lot and many are animals with the track rods
The figures/data are also in Club 8090 Wiki as well as Brickyard websites.

[HarryMann]

How do you know it's out? Have you kerbed it... changed the track rods or lowered it
Brickwerks will do it for you.

[CovKid]

Or do it with a broomhandle and screw. I do mine that way - always have. Gets it spot on. More reading here:

http://www.honestjohn.co.uk/forum/post/ ... tm?t=21924" onclick="window.open(this.href);return false;

Camber is easy. You aim for dead upright. You can do that with a square and spirit level.

[mitchell1551]

Need mine doind aswell, will give you a shout when I find somewhere, if it wasn't for the price of rubber I would just do it myself.
Would I be right in guessing you have the black and white tin top down by the old Brus arms, thinking I might of met up with you at kingfisher site in knaresborough.

no i live in seaton and i have found a garage that will do it clarke auto repairs park view ind est £30 .spoken to a couple of lads from town who have T25s and use him.i will let you know if ant good