Brake lights

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Post Reply
User avatar
Choppski
Registered user
Posts: 140
Joined: 12 May 2010, 20:19
80-90 Mem No: 8838
Location: Cheshire

Brake lights

Post by Choppski »

Bit of a wierd one which i'd like some advice if anyone else has suffered from this.

Recently bought some red LED brake light bulbs from Campervan Culture and i decided to check how bright the lights look like before i did. However, neither brake light was working....so i checked the fuse (no. 8) and yes it had blown. When this happened i'm not sure but this i went to Vanjamboree at the weekend and i assume this was during than trip. replaced it with a LFL 8am fuse tried the brakes again and, yup, it blow blew straight away.

Neither bulb had blown, but the metal seat the in the cluster was covered in white powder and a little corrosion which i cleaned off a much as i could with steel wool, cleaned the connector pins and tried again. This time the bulbs worked ok.

Would the corrosion cause the fuse to blow or is there anything else to look for? I couldn't get the metal plate out of the plastic cowling of the cluster without fear of breaking it - is there a trick or should i look at buying a new cluster?

Replaced with the LED lights into the cluster and they do give a more red light, than pink, than the standard bulbs but not much brighter to be honest. But at least i have some spare now!!
1982 Viking with 2.0 CU

Carpe Diem

User avatar
CovKid
Trader
Posts: 8411
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Re: Brake lights

Post by CovKid »

corrosion = resistance = blown fuse - or can.

This is more likely with LED bulbs I'm afraid. Tungsten ones tend to shunt the load whereas LED ones draw much less.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.

Post Reply