Well,OS rear corner
started as this under the sealant
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4327_zpsbxlhx3nq.jpg)
so as usual one thing turns into another and its off and out
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4330_zpsr9ga1f71.jpg)
sorry bout the flash
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4329_zpszbji62k2.jpg)
idea is to make up the missing areas by butt welding to an oe finish point
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4339_zpsvb3osiky.jpg)
then the edge of the old tray ready to accept the outer closure
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4340_zpsgcserejz.jpg)
like this
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4344_zpsfhpaxgbo.jpg)
next is this fillet to tie the rest in as will show later
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4349_zpspkf5ovkd.jpg)
these next few are just trial fits of the other parts
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4347_zpsoh7eww1m.jpg)
again , keep trying and checking as an error here will only get worse when it comke to lining up the wing etc
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4348_zpsttr03ziu.jpg)
blood
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4351_zpsozvg9j79.jpg)
im modifying this area a little so
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4353_zpsagpwaoxa.jpg)
joined up
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4354_zpsyhzs4qfw.jpg)
other side
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4355_zpsexolarfh.jpg)
it goes in here instead of the large box that was there
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4356_zpsktcjpbsa.jpg)
so this can sit there with a little clearance
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4358_zpsry2jku5c.jpg)
it also means that the tow bar can be accessed and removed etc
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4359_zps9xierwmt.jpg)
rear corner ready to weld
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4365_zpsl4rqszqq.jpg)
done
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4366_zpsvjyivv3r.jpg)
i will add the lower rear panel after the wing is fitted as these can then be tweaked as needed
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4370_zpsau7ylzwb.jpg)
product applied for now, it will get sealed later
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4372_zps68vi5nmu.jpg)
spring base added
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4360_zpswzurbm2z.jpg)
I still have a few of these £10+ post
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG4368_zps60svircn.jpg)
thats it for today
mm
![Very Happy :D](./images/smilies/icon_biggrin.gif)