Red LIve wire from back of hazard switch

[brandygangster]

Hi Guys

I wired up my new radio into the van and when doing it i found a stray live wire behind radio area unconnected to anything. I pulled it back and traced it to the back of the hazard switch.

Anyone know where the wire should be connected to as my hazards are now not working, i guess it come off when i pushed the cage in but i cant see any obvious terminal etc missing a wire

cheers

neil

[Bubble Meister]

On my van (early system with bullet fuses) there are two red wires going to the same terminal on the hazard warning switch - power supply from fuse 9 to the switch and then from the switch to the radio.

[MidLifeCrisis]

If you've been messing around back behind the radio it's possible that you may have shorted that wire and blown the #9 fuse (if you have the early bullet type fuses - as mentioned above) ...... I'd check that out as a possible source of problem with hazards not working