heater blower

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
diviy
Registered user
Posts: 55
Joined: 11 Oct 2005, 20:55
80-90 Mem No: 1590
Location: swansea

heater blower

Post by diviy »

tips for changing it ???? :( :( :( :(
number 1590 i think!!!!
Top
User avatar
T'Onion
Moderator
Posts: 10812
Joined: 07 Oct 2005, 17:39
80-90 Mem No: 255
Location: Sheffield or 07737167005

Post by T'Onion »

Its a dash out jobbie (if you didnt know)
victus in mutuo vicis
Ego mori tu mori
Top
User avatar
T'Onion
Moderator
Posts: 10812
Joined: 07 Oct 2005, 17:39
80-90 Mem No: 255
Location: Sheffield or 07737167005

Post by T'Onion »

sorry that was a "pooh" reply :oops:

a good pair of mole grips and a wide drive or road cos both doors have to open to remove the dash,
don't forget the little screws near the windscreen .
it should take about an hour to remove the dash,
victus in mutuo vicis
Ego mori tu mori
Top
Ivorblueun
Registered user
Posts: 84
Joined: 10 Oct 2005, 19:37
80-90 Mem No: 1407
Location: Torpoint, Cornwall

Post by Ivorblueun »

when i did mine the two halves of the flap box that it sits in were stuck together it took a bit of patience, sharp thin blade and a few choice words to get it seperated. Apart from that and the 2 security bolts on the steering column upper bracket its pretty straight forward if you have a haynes manual it will help in locating all the screws etc
Stu

mine was a blue 89 Td Hitop
Top
TOMMY THE CAT
Registered user
Posts: 68
Joined: 10 Oct 2005, 16:14
80-90 Mem No: 48
Location: SHROPSHIRE

BOLTS

Post by TOMMY THE CAT »

Pres you need new shear bolts where are these available?
TA
Top
NeedABus
Registered user
Posts: 8
Joined: 11 Oct 2005, 06:08
80-90 Mem No: 602
Location: Emsworth, Hants

Post by NeedABus »

I just put the old ones back on!
Gareth
Member No 602
Top
Locked

Return to “Mechanical”