Hot air hose
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 82
- Joined: 30 May 2014, 22:31
- 80-90 Mem No: 0
Hot air hose
Anyone know where I can get a hot air hose or equivalent, it's from the heater matrix to the RH vent on the dashboard. Went missing when my van had some work done and as dash pod is still out I want to replace, was thinking of a vw beetle hot air hoses in the engine bay. Any ideas???
- CovKid
- Trader
- Posts: 8411
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Hot air hose
I think its a different size (Beetle stuff bigger). Worth measuring. Caravan places (the big ones) do all different sizes of that hose though 
Jacksons of Old Arley (which is near me) even managed to match my Propex ducting hose. Think it was a fiver a metre which didn't seem bad.

Jacksons of Old Arley (which is near me) even managed to match my Propex ducting hose. Think it was a fiver a metre which didn't seem bad.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
-
- Registered user
- Posts: 82
- Joined: 30 May 2014, 22:31
- 80-90 Mem No: 0
Re: Hot air hose
Thanks, I will search caravan spares and see what I can find. 

- Oldiebut goodie
- Registered user
- Posts: 7490
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Hot air hose
Plenty of ducting available all over the place - search for ducting rather than air hose though as you will end up with compressor airline stuff. I won't point you anywhere as you haven't said what size you are looking for.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 82
- Joined: 30 May 2014, 22:31
- 80-90 Mem No: 0
Re: Hot air hose
Had a measure, circular pipe from the heater matrix is 37mm internal diameter, this goes behind the brake servo to the RH vent which is rectangular with curved edges!!! And 50x70mm. Can make an adaptor for the vent so need some 37mm ID hot air pipe.
-
- Trader
- Posts: 17229
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Hot air hose
There is a molded fitting for the back of the vent
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
- Oldiebut goodie
- Registered user
- Posts: 7490
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Hot air hose
35mm and 38mm in neoprene up to 120 degrees, silicone up to 260 degrees. I know that the silicone will not stretch but not sure about the neoprene.http://www.ebay.co.uk/itm/Flexible-Air- ... 4d08602ebd
Don't be tempted by aluminium only ducting - it rattles!
Don't be tempted by aluminium only ducting - it rattles!
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 82
- Joined: 30 May 2014, 22:31
- 80-90 Mem No: 0
Re: Hot air hose
Oldiebut goodie, top tip on the hoses, ordered one length, nice and cheap too. Nice one
Any idea where I can get the moulding from, it has since disappeared from the vent after work was done on the servo. Thanks people

Any idea where I can get the moulding from, it has since disappeared from the vent after work was done on the servo. Thanks people