Hi all,
I hope you are well. I have a multivan with central locking, but the central locking has not worked for some years now. My van has just been repainted and had a new rear tailgate rubber seal fitted. When i got the van home I went to check the boot was locked as i usually do, but i found it wasn't.
Prior to getting van painted, to open the boot i had to put the key in the lock, turn 15-20 degrees clockwise and push the lock in...this would pop opent the lock. When i got it back, the boot was opening freely by just pushing the lock in, then if i shut it the tailgate would not be locked (which it used to). Anyway after taking some advice i slammed it shut (as got told it could be the new rubber...which incidentally seems to have the tailgate sitting slightly proud. This seemed to lock the tailgate, however now...when i push the lock in nothing happens, if i turn the key in the barrel it feels like there is no resistance etc. I have tried pushing the tailgate in etc...but no joy.
Could someone please talk me through what is best to do next. Do i need to climb in the boot and pop off the tailgate door card....then what?
Any advice appreciated...also does this sound like a need a new lock, or is this related to the central locking?
Thanks
Marcus
Getting into my rear tailgate
Moderators: User administrators, Moderators
- tonytech
- Registered user
- Posts: 1194
- Joined: 11 Oct 2005, 06:40
- 80-90 Mem No: 477
- Location: Liverpool
Re: Getting into my rear tailgate
It sounds like the central locking mechanism has moved.
Normally the CL can be in one of two positions, but if the actuator isnt working the slider can get stuck between the two.
Normally if the CL is in locked, turning the key 45 degrees clockwise and pressing the button opens the tailgate.
If the Cl is working the lock barrel can be left horizontal and simply pressing the button opens the tailgate.
Pull the trim off the inside of the tailgate and have a look at the mechanism, try moving the slider.
T
Normally the CL can be in one of two positions, but if the actuator isnt working the slider can get stuck between the two.
Normally if the CL is in locked, turning the key 45 degrees clockwise and pressing the button opens the tailgate.
If the Cl is working the lock barrel can be left horizontal and simply pressing the button opens the tailgate.
Pull the trim off the inside of the tailgate and have a look at the mechanism, try moving the slider.
T
There are 10 kinds of people. those who understand Binary and those who dont
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Getting into my rear tailgate
Thanks very much Tony...I will have a try of that.
Regards
Marcus
Regards
Marcus