Well lots going on but back to the task in hand, its been played with here and there and some parts have to be removed in a more aggressive manner than i would prefer but result is the same...
seems they got carried away with the spotting
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3804_zps6o1lljx6.jpg)
so
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3805_zpsmwusc79f.jpg)
i did unpick the 4 spots here, been as easy to chop it off and remake but a line to be drawn someplace
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3807_zpsnmud6be8.jpg)
ive opened the rear arm area up , its not terminal but needs the usual,
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3809_zpszzz4knri.jpg)
straight edge to cut the crappy bit out
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3810_zps4lrx6if1.jpg)
in fact quite a bit cut out
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3813_zpsm9byzflc.jpg)
no point leaving this sort of stuff here as its never going to be easier to do now
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3817_zpspldd3atv.jpg)
first part made to fit here,in the same gauge as OE.
![Image](http://i1288.photobucket.com/albums/b496/metulman/lankavagon/IMAG3818_zpsmgsgvg5d.jpg)
likewise with a new load bed edge to form the closure
mm