AVG (AFN) into Panel Van

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

AVG (AFN) into Panel Van

Post by jes*b »

Gearbox is nearly ready, Aidan has worked it up from two lesser quality boxes I had, one was the 5:4:3 I brought back from Finland which was pretty much a write off once box was opened but thats a whole thread all on its own. New box is having longer 3rd & 4th, oiling plates new C&P. Loom from Sharan is off with Andy , decisions needing to be made, Which leaves me with the AVG 100k miles , new Midland Turbo reworked and refitted and tested before I broke the car. To start I am planning to strip and clean as thats well within my skill set other than that I need to work out how the engine is gong to be set up. The turbo will stay so that is my starting point. Gonna deal with the pumps etc tomorrow, what will I need to keep and what can go?
Image
Image

max and caddy
Registered user
Posts: 1931
Joined: 21 Feb 2012, 21:47
80-90 Mem No: 0
Location: lancaster uk

Re: AVG (AFN) into Panel Van

Post by max and caddy »

Bin the aircon pump, lose the water pump pulley as it needs a a non aircon one..have the part numbers if you need them..a shorter belt also..dependent on your rev counter the alt may need swapping...talk to Andy about that. PAS pump will work as it is, again a shorter belt needed there.. just re configure the pipes a little.

I have a engine sat on the bench with all this done so will get part no s for you...if you want used parts let me know.

Flywheel of the shazzer won't work...tdi golf one required..

silverbullet
Trader
Posts: 17231
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: AVG (AFN) into Panel Van

Post by silverbullet »

Dont bin the a/c pump ;)
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

Cheers. I have a rev diesel clock set on the shelf so will speak with Andy .... Used parts are derigeur I'm all ears Alex. Air con pump will be shelved , one or two vans around waiting for an AC modernisation makeover. Will strip the ancillaries off end of week , will I end up with specialised belts or just the shazza ones for a non ac set up ?

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

Stripped some ancillaries may well re fit them just to get the hang as it were. close up pic of alternator for Andy when he wanders this way. As the engine will be in a state of partial undress for a while is there anything i should be doing to it storage wise? and i have access to a steam cleaner so might well give it a going over with this....im guessing i should block up anything that involves air intake?
Image
Image

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

Image

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

Also as its been sat a while any alloy has a bloom over it - any suggestions as to best way to clean this ?

User avatar
Titus A Duxass
Registered user
Posts: 5777
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: AVG (AFN) into Panel Van

Post by Titus A Duxass »

jes*b wrote:Also as its been sat a while any alloy has a bloom over it - any suggestions as to best way to clean this ?

You could try an alloy wheel cleaner.
VW T3 GTi Camper 2,0l

silverbullet
Trader
Posts: 17231
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: AVG (AFN) into Panel Van

Post by silverbullet »

Or dilute the contents of a dead battery, same thing.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys

User avatar
Titus A Duxass
Registered user
Posts: 5777
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: AVG (AFN) into Panel Van

Post by Titus A Duxass »

silverbullet wrote:Or dilute the contents of a dead battery, same thing.

Jaein!
VW T3 GTi Camper 2,0l

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

max and caddy wrote:Bin the aircon pump, lose the water pump pulley as it needs a a non aircon one..have the part numbers if you need them..

yes please

a shorter belt also..dependent on your rev counter the alt may need swapping...talk to Andy about that. - Andy what do you think?


PAS pump will work as it is, again a shorter belt needed there.. just re configure the pipes a little.

I have a engine sat on the bench with all this done so will get part no s for you...if you want used parts let me know.

Flywheel of the shazzer won't work...tdi golf one required..

User avatar
syncroandy
Trader
Posts: 1920
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: AVG (AFN) into Panel Van

Post by syncroandy »

Jes, the Sharan harness doesn't use the 'W terminal' (DIN terminology), so your alt may be missing that physical pin. But you can add a W terminal connection by soldering a wire onto one of the stator windings. Plenty of info out there via Google..

Once you've done that, you'll have to re-calibrate your tacho to produce a sensible reading.

This is all 'in principle', I've not had to do it myself, though many others have I believe. Personally, I wouldn't bother with any of that, I'd just fit a modern dash panel.
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

Alex , have you got a part number for the non air con water pump pulley ? Also have binned the dual mass , need a fly wheel , and a starter adaptor ( bw, I guess ? )

max and caddy
Registered user
Posts: 1931
Joined: 21 Feb 2012, 21:47
80-90 Mem No: 0
Location: lancaster uk

Re: AVG (AFN) into Panel Van

Post by max and caddy »

I have a used pulley and golf tdi flywheel here Jes, no starter adaptors but could do with a couple myself! I use the early alternator as it has a W terminal and drives a rev counter with decent acuraccy without any mods...only 70amp those though.

jes*b
Registered user
Posts: 879
Joined: 25 May 2008, 09:41
80-90 Mem No: 10335
Location: folkestone, kent

Re: AVG (AFN) into Panel Van

Post by jes*b »

early, as in early shazza? also another shazza being dropped off today bit like the one you picked up last year i think.......might well be an 'early' .....

Post Reply