hello , i have had a 2.0 golf gti 8v fitted to my t25 , i recently had a socket fitted to the ecu so that i could fit a performance chip , but when i re installed the ecu it wont start , even with the old chip back in , it turns over but its as tho the immobiliser has kicked in , i have checked the fuel pump relay and there is no voltage at the coil to pull it in , the wirng seems ok , when i turn the ignition on the pump normally primes for a second and its not doing , any ideas ?
cheers dave
AAG gti ecu non starter
Moderators: User administrators, Moderators
- jim potter
- Registered user
- Posts: 160
- Joined: 06 May 2011, 14:10
- 80-90 Mem No: 10094
- Location: colchester, essex
Re: AAG gti ecu non starter
have you got the diag socket wired up..
can you communicate with it via vag com or other diag software ?
was the chip orientated correctly ?
whom socketed the ecu ? how was it done
can you communicate with it via vag com or other diag software ?
was the chip orientated correctly ?
whom socketed the ecu ? how was it done
Gti caravelle gl.
-
- Registered user
- Posts: 30
- Joined: 12 Nov 2009, 21:48
Re: AAG gti ecu non starter
hello , brickwerks fitted the wiring and it worked before then the auto electrician fitted the diagnostic plug , but it doesnt seem to work anymore , vw parts international fitted the socket , not sure how they did it sorry , the chip only fits one way as it has a corner missing
- jim potter
- Registered user
- Posts: 160
- Joined: 06 May 2011, 14:10
- 80-90 Mem No: 10094
- Location: colchester, essex